California Residents WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov
The “Multi-Wave” Wireless Control System Controls Pools/Spas and now your Home!
Combine the PE653 Multi-Wave Controller with the PE953 Multi-Wave Hand Held Transceiver and automate your pool/spa and even your home with the most technologically advanced wireless control system in the market today!
The Multi-Wave is designed as a “plug and play” system. Install the water sensor PA122 and watch the Multi-Wave thermostat come alive to maintain your pool and/or spa water temperatures. Install the air sensor 178PA28A and let the Multi-Wave freeze protection system take over to protect your investment. Connect your equipment to the intelligent RS485 communication port and relax as the Multi-Wave recognizes and controls your equipment with ease.
Included:
- Owner’s Manual
- Equipment
- Labels
- Three AA Batteries
- Hand Held PE953 Transmitter
- Small Flat Head Screwdriver
- Water Sensor with Hose Clamp
- Receiving PE653 Controller with 2T2485GA Enclosure
- Air Temperature Sensor
- Water Temperature Sensor
Specifications: A Full Two-Speed and Variable-Speed Control!
Enclosure & Control: NEMA 3R rated for Indoor/Outdoor installation in beige finish 93 /8 in. (23.8 cm) H x 51 /2 in. (14.0 cm) W x 35 /8 in. (9.2 cm) D
Enclosure Knockouts: Combination 1 /2 – 3 /4 in. nominal knockouts, one on back and each side of enclosure and two on bottom
Shipping Weight: 5.4 lbs (2.3 kg)
Agency Approval: CSA/C-US
Ratings:
Control Supply: 120, 240 VAC(NO Neutral wire required), 50/60Hz, 5-Watts Maximum
Circuit #1: 20 Amp Resistive (17 FLA, 80 LRA), 120, 240 VAC 50/60 Hz Circuit #2 thru #5: 15 Amp Resistive (10 FLA, 60 LRA), 120, 240 VAC, 50/60 Hz
